Az31b Az31 Az61 Magnesium Alloy Rod 20mm Extruded Mg Alloy Bar
Introduction:
With the development of light, low energy, high -speed, and high reliability directions such as cars and rail transit, high -performance lightweight materials are urgently needed. As the lightest metal structure material, magnesium alloy has the advantages of high strength, excellent damping performance, and recycling. It is considered to be an important supplement to traditional metal materials such as steel, aluminum alloy, and titanium alloy to improve energy in transportation.
Magnesium alloy is the lightest engineering metal material, which has a series of advantages of low density and high strength. It is an important lightweight material in the automotive, aerospace and military industry. Metal magnesium and its alloy have a secret six -way structure. The independent sliding system that can be started at room temperature is less. Therefore, the deformation ability is poor, and the widespread application of magnesium alloy is limited to a certain extent.
Parameter:
| | |
| | 300mm or as customer's required |
| | 900.0mm or as customer's required |
| | 2000mm or as customer's required |
| | 1000*2000mm,1219*2438mm,1219*3048mm,or as customer's required |
| | Carving,aerospace,auto,concrete tools,3C(cell phone/camera/compute),water heater,refrigerator,gas pipelines etc. |
| | 1.Good resistance to deformation force |
| |
3.Good absorption of vibration energy performance |
4.Good impact energy absorption characteristics |
5.Low melting, small specific heat |
| | Ordinary industrial surface,or customized |
| | |
| catalog | 1.Round bar |
| 1)Hot rolled black bar: (5-400)x6000mm or according to your requirement. |
| 2)Acid round bar: (5-400)x6000mm or according to your requirement. |
| 3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement. |
| 4)Polishing round bar: (5-400)x6000mm or according to your requests. |
| 2.Angle bar |
| 1)Hot rolled angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests |
| 2)Acid angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. |
| 3)Cold drawn angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. |
| 3. Flat bar |
| 1)Hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. |
| 2)Cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. |
| 4. Channel bar |
| 1)Hot rolled channel bar: (5-100)x6000mm or according to your requests. |
| 2)Acid channel bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn channel bar: (1-20)x6000mm or according to your requests |
| 5.Hexagon bar |
| 1)Hot rolled hexagon bar: (5-100)x6000mm or according to your requests. |
| 2) Acid hexagon bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn hexagon bar: (1-20)x6000mm or according to your requests t. |
| 4)Polishing hexagon bar: (5-100)x6000mm or according to your requests. |
| 6. H Steel bar |
| 1)Hot rolled H bar: (5-100)x6000mm or according to your requests. |
| 2)Acid H bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn H bar: (1-20)x6000mm or according to your requests. |
| 7. Square bar |
| 1)Hot rolled black bar: (5*5-400*400)x6000mm or according to your requests. |
| 2)Acid square bar: (5*5-400*400)x6000mm or according to your requests. |
| 3)Cold drawn square bar: (1*1-20*20)x6000mm or according to your requests. |
| 4)Polishing square bar: (5*5-400*400)x6000mm or according to your requests |
Feature of Magnesium Rods:
(1) Light weight. As a light metal structure material, magnesium alloys are 1.74gcm-3, which is equivalent to 2/3 of aluminum, steel L/4, and zinc about 1/4. This characteristic is of great significance to reduce weight and reduce energy consumption in modern handicap products.
(2) higher strength than strength. Under the same rigidity conditions, the strong level of 1kg magnesium alloy is equal to 18kg of aluminum and 2.1kg steel.
(3) High shock absorption performance. Magnesium has excellent stagnation shock absorption performance, which can absorb vibration and noise. It is used as a device case to reduce noise transmission, impact resistance, and reduce depression damage. Its impact resistance is 20 times that of plastic.
(4) Good casting performance. Under the condition of maintaining a good structure, the wall thickness of the magnesium products can be less than 0.6mm, which cannot be achieved by plastic products under the same intensity. Aluminum can only be compared with magnesium in the range of 1.2 ~ 1.5mm.
(5) High -molding productivity. Compared with aluminum, the heat capacity of magnesium alloys is lower, which means that it can solidify faster in the mold. Generally speaking, its productivity is 40%to 50%higher than aluminum die, and it can reach twice the maximum of twice the die -cast aluminum.
Standard:ASTM B843-1995,GB/T21448-2008,GB/T17731-2009
Production-Quality Control
Quality Control in our foundry begins on the foundry floor, where the first line of inspection is the casting and molding crew, our lab technicians inspectors and managers completes the quality team. Our quality control staff carefully monitors raw material, core materials,packaging and all aspects of production.
