AZ61 Magnesium Alloy Rod Magnesium Alloy Extruded Tube Pipe Bar
Parameter:
| | |
| | 300mm or as customer's required |
| | 900.0mm or as customer's required |
| | 2000mm or as customer's required |
| | 1000*2000mm,1219*2438mm,1219*3048mm,or as customer's required |
| | Carving,aerospace,auto,concrete tools,3C(cell phone/camera/compute),water heater,refrigerator,gas pipelines etc. |
| | 1.Good resistance to deformation force |
| |
3.Good absorption of vibration energy performance |
4.Good impact energy absorption characteristics |
5.Low melting, small specific heat |
| | Ordinary industrial surface,or customized |
| | |
| loy Element | Type | Chemical Composition% | Other elements b |
| Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Sub-total | total |
| MgAlZn | AZ31B | Balance | 2.5-3.5 | 0.6-1.4 | 0.1-0.2 | --- | --- | ≤0.08 | ≤0.003 | ≤0.04 | ≤0.01 | ≤0.001 | --- | ≤0.05 | ≤0.30 |
| AZ40M | Balance | 3.0-4.0 | 0.2-0.8 | 0.15-0.5 | --- | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.005 | ≤0.01 | ≤0.01 | ≤0.30 |
| AZ80A | Balance | 7.8-9.2 | 0.2-0.8 | 0.12-0.5 | --- | --- | ≤0.10 | ≤0.005 | --- | ≤0.05 | ≤0.005 | --- | --- | ≤0.30 |
| AZ91D | Balance | 8.5-9.5 | 0.45-0.9 | 0.17-0.4 | --- | --- | ≤0.08 | ≤0.004 | --- | ≤0.025 | ≤0.001 | 0.0005- | ≤0.01 | ≤0.30 |
| 0.003 |
| MgMn | M2M | Balance | ≤0.20 | ≤0.30 | 1.3-2.5 | --- | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.007 | ≤0.01 | ≤0.01 | ≤0.20 |
| MgZnZr | ZK61M | Balance | ≤0.05 | 5.0-6.0 | ≤0.10 | --- | 0.3-0.9 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.005 | ≤0.01 | ≤0.01 | ≤0.30 |
| MgMnRe | ME20M | Balance | ≤0.20 | ≤0.30 | 1.32-2.2 | 0.15-0.35 | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.007 | ≤0.01 | ≤0.01 | ≤0.30 |
Introduction:
The proportion of magnesium alloy is only 1.8g/ cm³, and the proportion of aluminum alloy is 2.7g/ cm³. In contrast, magnesium alloy is lighter. In terms of production of large castings, the generating rate of magnesium alloy castings is high. Although the cost of processing is high in the price of magnesium metal materials and the cost of processing after the casting of magnesium alloy is high, the overall production cost of magnesium alloy castings and aluminum alloy castings is similar. At present, the price of magnesium alloy is 27,500 yuan/ton, the aluminum A00 price is 20,800 yuan/ton, and the ADC12 price is 19,800 yuan/ton. Magnesium for large castings, in addition to lightweight advantages, also has cost advantages.
Application:
The "lightweight" characteristics of magnesium alloy make it highlighting in many applications. For example, the application of magnesium alloy castings in commercial vehicles: Compared with passenger cars, commercial vehicles have a longer service life (total kilometer), so it is very important for it to maximize the load (capacity) and improve economic benefits. Generally speaking, reducing weight to the vehicle means improving capacity, and lighter commercial vehicles can transport more goods. Then the application of large magnesium alloy castings can help commercial vehicles lose weight, increase cargo capacity, increase range of mileage, and shorten the return on investment.
Magnesium alloy castings have been widely used in consumer electronics, laptops, and wearable products.It is also used in high -end products such as AR/VR glasses, which can give electronic products higher added value and better improve the user experience.
