Dome Metals Co., Ltd.
Professional technicians, sophisticated instruments and equipment, innovative research and development ideas, to provide you with high-quality magnesium alloy products.
Add to Cart
Mg Sheet Slab AZ31B - H24 Magnesium Alloy Plate Az91 We43 We54 We94 Zk60 Am60
Material AZ31 AZ61 AZ91 WE43 WE54 WE94 ZK60 AM80
Magnesium alloy plate with a small specific gravity, high intensity , high wear-resisting performance, has some of the corrosion resistance and resistance to radiation performance, good chemical stability against the alkali and mineral,and good weldability and workability.
hot rolling process:ensuring perfect inner quality without any flaw,slag, hole, burrs or scratches.
• Advantage of magnesium
- Magnesium is the lightest industrial metal in the world
- One third lighter than aluminum
- Magnesium is as strong as aluminum
- Magnesium is shock absorbing and dampens vibrations
- Magnesium is very machinable- We supply AZ31, AZ61, AZ80, and ZK60 Alloys, among others
• Production Process
Magnesium Plate is produced by process semi-casting and hot rolling with tons rolling machine.
Semi-casting is through using vertical casting and is colded by constant temperature well water under around during casting processing. Making casting completedly slabs(billets) have very small grain and very tight spacing between grain and grain.
Ensuring perfect inner quality.This point can be verified that we used Inspection method for macrostructure of wrought magnesium alloy products.
We produce magnesium alloy plate conforms to MIL-T-38749(USAF) Standard.
Normal mention to Magnesium Tooling Plate is pointed magnesium alloy hot rolling platewhich is through heating treament state H24, H26,O.
So Magnesium Tooling Plate ia also called AZ31B H24 magnesium alloy plate.
Have a perfect flatness and good surface with moderate strength and ductility.
Chemical Composition:
| Model | Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Other | |
| Single | Total | |||||||||||||
| AZ31B | Bal. | 2.5-3.5 | 0.6-1.4 | 0.2-1.0 | - | - | ≦0.08 | ≦0.003 | ≦0.04 | ≦0.01 | ≦0.001 | - | ≦0.05 | ≦0.30 |
| AZ91D | Bal. | 8.5-9.5 | 0.45-0.90 | 0.17-0.40 | - | - | ≦0.08 | ≦0.004 | - | ≦0.025 | ≦0.001 | 0.0005-0.003 | ≦0.01 | - |
| AZ61 | Bal. | 5.5-7.0 | 0.5-1.5 | 0.15-0.50 | - | - | ≦0.10 | ≦0.05 | - | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| AZ80 | Bal. | 7.8-9.2 | 0.2-0.8 | 0.12-0.50 | - | - | ≦0.10 | ≦0.005 | - | ≦0.05 | ≦0.005 | - | - | ≦0.30 |
| ZK61M | Bal. | ≦0.05 | 5.0-6.0 | ≦0.10 | - | 0.3-0.9 | ≦0.05 | ≦0.05 | - | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| ME20M | Bal. | ≦0.20 | ≦0.30 | 1.3-2.2 | 0.15-0.35 | - | ≦0.10 | ≦0.05 | - | ≦0.05 | ≦0.007 | ≦0.01 | ≦0.01 | ≦0.30 |
